TallyGenicom 7008 TT4 Guide de l'utilisateur télécharger pdf

Quick Start Guide

7006 7008 Thermal Printer

Insert the Installation CD shipped with the 7006/7008 printer into the computer and follow the instructions on the screen.

Also please feel free to use the TallyGenicom website for full details on setting up and using the 7006 and/or 7008 printer:

http://jadmin.tallygenicom.com

To Get Started

Remove the following contents from the Box:

1. The 7006/7008 Printer

2. The Installation CD

3. Power Supply Kit including : - Power Cord

- Power Supply

4. The Accessory Box including: - Spindle

- USB Cable

- Sample Media Kit

- Documentation

Unpack the Printer

Problem Possible Cause Problem Possible Cause

No power or ready

lights

Printer switched off

Power supply not connected properly

Power supply not working properly

Labels feed but

nothing prints

Ribbon not loaded for TT media

Ribbon loaded incorrectly

Darkness too low

Red Ready Light Printhead unlatched

Out of media: labels, tags, or ribbon

Miss indexed label or tag

Labels continuously

feeding

Wrong indexing mode (gap, bar, TT)

Printer indexing not calibrated

Index sensor in the wrong position

• Thermal transfer printers can operate in direct thermal or thermal transfer mode and must be set to the correct print mode for proper

results.

• All 7006/7008 printers can use black bar, gap, or notch indexing. Continuous media may also be used.

• Label printing software provides the means to change the printer’s settings. See the software and network printing sections of the User’s

Guide (located on the Installation CD or the TallyGenicom website) for more details.

• Refer to the TallyGenicom Programming Manual, included on the Installation CD or the TallyGenicom website, to change the printer’s

settings using TallyGenicom Programming Language (CPL).

• The Installation CD includes Microsoft Windows drivers, label design software, and complete 7006/7008 documentation including the

7006/7008 User’s Guide.

Self-Testing

1. Open the print mechanism. Turn the printer off when cleaning the printhead. Make sure the

printhead is completely dry before turning the printer back on.

2. Clean the printhead (A), platen (B), and the index sensors (C & D) with a soft, lint-free cloth or

a cotton swab saturated with 99 percent isopropyl alcohol.

3. Turn the printer on and press the FEED button to clean all sides of the roller.

CAUTION! INCORRECTLY CLEANING THE PRINTER WILL CAUSE PERMANENT DAMAGE

AND VOID THE PRINTER’S WARRANTY.

Cleaning & Maintenance

Troubleshooting Tips

General Printing Tips

TallyGenicom L.P., 4500 Daly Drive, Suite 100 Chantilly, VA 20151 U.S.A, Phone: +1 703 633 8700, Fax: +1 703 222 7629,

www.tallygenicom.com

3600008b-EN

TallyGenicom Address

Plug power supply to power source and a green LED will illuminate on the power supply.

Note: Do NOT power the printer on until instructed.

Proceed to the Printer Power Test section.

1 2

Connecting Power to the 7006/7008 Printer

EUROPEAN COMPLIANCE

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to

take adequate measures. CISPR22: The 7006/7008 printer meets applicable requirements for Emissions & Immunity.

RoHS COMPLIANCE: Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic

Equipment (RoHS). The 7006/7008 printer is RoHS compliant as of July 1, 2006.

FCC DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tion manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at the user’s own expense.

WEEE

Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). For WEEE recycling and recovery information, refer to the

TallyGenicom web site.

INDUSTRY CANADA NOTICE

This Class A digital apparatus complies with Canadian ICS-003 requirements.

TallyGenicom is a registered trademark of TallyGenicom LP. Other products and corporate names used in this publication may be trade-

marks or registered trademarks of other companies and are used only for explanation and to their owner’s benefit, without intent to infringe.

No part of this guide may be reproduced for any purpose or in any form including electronic storage and retrieval without the express permis-

sion of TallyGenicom.

Regulatories

WARNING! —SHOCK HAZARD AND STATIC DISCHARGE

Never operate the printer in a location where it can get wet. Personal injury could result. The discharge of electrostatic energy that accumu-

lates on the surface of the human body or other surfaces can damage or destroy the printhead or electronic components used in this device.

DO NOT TOUCH the printhead or the electronic components under the printhead carriage.

CAUTION! —PRINTER SETUP AND HANDLING

When installing or modifying the printer setup or configuration, ALWAYS TURN THE POWER OFF before: (1) connecting any cables, (2)

performing any cleaning or maintenance operations, or (3) moving the printer.

Important Safety Instructions

For detailed information, refer to the User Guide of the printer, which is provided on the CD shipped with your printer. Be sure to read the

safety guidelines in the User Guide before using this product. Keep the Quick Start Guide and the CD in a place which is easily accessible at

all times.

• Never place the printer in the vicinity of inflammable gas or

explosive substances.

• Place the printer on a solid and even base so that it cannot fall

down to the ground.

• Do not expose the printer to high temperatures or direct

sunlight.

• Be sure to connect the printer to a socket with the correct mains

voltage.

• Protect the printer from shock, impact and vibration. • Keep all liquids away from the printer.

• Always disconnect the system from the mains before opening

the device to perform maintenance work or remedy errors.

• Do not perform any operation or action in any way other than

provided in this manual. When in doubt, contact your dealer or

service company.

Accessory Box

Printer

Power Cord

Power Supply

The self test checks the printer’s overall operability and lists the printer’s current settings.

IMPORTANT! The printer should have media installed, be connected to AC power, and turned on.

1. Press and hold the FEED button.

2. Turn the printer ON while holding the FEED button.

3. Release the FEED button when the self test starts to print.

4. Important: In order to calibrate the form length of the label follow the instruction printed at the end of this

self test. The instruction states to now press the Feed key again.

5. Turn the printer off and then on again to return to normal printing operation.

1 2

Résumé du contenu

Page 1 - 7006 7008 Thermal Printer

Quick Start Guide 7006 7008 Thermal Printer Insert the Installation CD shipped with the 7006/7008 printer into the computer and follow the instructio

Page 2 - Outward Wound Media

Note: Prior to loading media, take a moment to review the media guides. They are spring loaded to provide improved media control during printing. The

Commentaires sur ces manuels

Pas de commentaire

TallyGenicom 7008 TT4 Guide de l'utilisateur

Naviguer en ligne ou télécharger Guide de l'utilisateur pour Imprimantes d'étiquettes TallyGenicom 7008 TT4. TallyGenicom 7008 TT4 Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels